CNC Turret Type Automatic Lathe

LND-AY series is A Single Spindle CNC Lathe with Y-Axis Slide 8 /12-Position Live Tools Turret for very complicate Turn - Mill machining. A most basic CNC Control System can be intalled for lowest cost machine available. Siemens-802D, Mitsubishi-E68 will be good for this application.

MODEL LND42AY LND65AY
Capacity
Collet bar capacity ,dia. (thru hele) mm Ø42 Ø65
Max. turning length mm Ø355
Max. turning dia. (3-Jaw Chuck) mm Ø165 (Ø6.5”) Ø210 (Ø8.3”)
Max. turning length collet chuck mm 300 (11.8”)
3-Jaw chuck mm 280 (11”) 254 (10”)
Spindle
Height of spindle center (approx.) mm 1100
Spindle nose - ISO A2-5 ISO A2-6
Collet chuck type - F48 F72
3-Jaw chuck size inch 6 8
Spindle thru hole / draw tube thru hole mm Ø53/Ø45 Ø78/Ø66
Power of spindle motor Kw 9
Max. spindle speed rpm 5000 4000
Main slide
Z-Axis slide travel mm S8LT:300 / S12LT:300
X-Axis slide travel mm S8LT:150 / S12LT:150
Y-Axis slide travel mm ±55 (110)
Resolution mm 0.001 (0.0001”)
Turret
Number of tool position (BARUFFALDI S12LT / LICO S8LT) _ 12 / 8
Type of tool shank mm Ø25 / □20mm (Ø1” / □3/4”)
Servo Motors
Rapid move (X-Axis / Z-Axis) mm/ mim 20
Rapid move (Y-Axis) mm/mim 8
Feed rate M/mim 0 – 10000
X / Z - Axis power Kw 2.29
Y- Axis power Kw 1.48
Hydraulic tailstock
Quill diameter mm Ø 50
Center taper _ MT-3 / MT-4
Quill stroke _ 80
Manual stroke mm 185
Hydraulic pressure Kg/cm2 5-30
Machine space , weight and power requirements
Overall dimensions (L x W x H) mm 2780 x 1750 x 1950
Machine weight kgs 3500 3600
Hydraulic tank capacity liters 35
Hydraulic pump motor liters 0.75
Coolant tank capacity liters 160
Pump power kW 1.27
Lubrication capacity _ 4 L,15 sec / 15min
Total power requirement KVA 20 / 25