• This machine is specially designed for turning long shaft and long mandrel. Its maximum turning outside diameter is 15mm. The working length is ranging from 175mm to 450mm. It is easy to set and adjust the working length and the machine is stable and easy to operate.
• This machine adopts twin clamping chuck design. There is no burr or tip on both cutting ends. The cutting ends are very smooth. This is better than average auto lathe does.
• The operation panel is clear and compact. There is MANUAL mode and AUTO mode for choice and that is convenient for technician to adjust the machine. This machine is equipped with PLC control system, which is easy to operate. Furthermore, it is equipped with radiation device that can prolong service life and make the machine work stably.
• This machine has synchronal cutting function. Beside round bar, it can also turn hexagonal bar.
• The revolution speed is controlled independently. This design is suitable for hard material turning. The spindle is controlled by inverter and it is stepless change and on the other hand, the cam is step change. These two mechanisms can be controlled separately and independently. It is easy to set optimal speed ratio for turning. That will heighten turning accuracy and prolong cutting tool life.
• The finished parts are colleted at backside. The chip and finished parts are separated. This machine is equipped with a part conveyer, which enables the operator to handle the finished parts easily. Moreover, the machine has close type full cover, which can prevent oil splash and keep the work site clear and clean.

All specifications, dimensions and design characteristics shown in this website are subject to change without notice.