CNC Horizontal Boring & Milling Machine - HB-110A
- A high precision indexing work table driven by a Servo motor provides high accurate indexing.
- The CNC boring and milling machine provides multiple face machining at one time. Boring, milling, drilling and tapping can be done just in one set-up.
- The extra heavy, wide one-piece base has 4 slideways for rigidity.
- Box type column features outstanding stability in heavy duty machining and accurate dynamic level at all time.
- A 60 tool chain type ATC magazine provides safe and stable tool exchanges, enhancing machining flexibility and efficiency.
Specification
| TABLE | ||
|---|---|---|
| Table size | 1,200 x 1,000 mm | |
| T slot (Wide x No. x Pitch) | 22H7 x 7 x 125 mm | |
| Max. load capacity | 4,500 kg | |
| Min. indexing unit | 0.001° | |
| B axis rapid feed | 2 rpm | |
| Table height from ground | 1,145 mm | |
| CAPACITY | ||
| X axis travel | 1,800 mm | |
| Y axis travel | 1,350 mm | |
| Z axis travel | 1020 mm | |
| W axis travel | 550 mm | |
| Spindle nose to table center | -145 ~ 1,425 mm | |
| Spindle center to table top | 0 ~ 1,350 mm | |
| SPINDLE | ||
| Spindle nose | BT50 | |
| Spindle diameter | 110 mm | |
| Output max. | 135 kg-m | |
| Spindle speed (2 ranges) | Lo-speed | 5 ~ 625 rpm |
| Hi-speed | 626 ~ 2,500 rpm | |
| FEED | ||
| Rapid of X, Y, Z, W axis | 15 / 12 /15 / 6 m/min | |
| Feed rate of X, Y, Z axis | 1 ~ 6,000 mm/min | |
| Feed rate of W axis | 1 ~ 4,000 mm/min | |
| A.T.C. | ||
| Magazine capacity | 60 pcs | |
| Pull stud | MAS-P50-1 | |
| Max. tool length | 400 mm | |
| Max. tool weight | 25 kg | |
| Max. tool diameter | φ125/φ250 mm(w/o adjacent tool) | |
| Tool selection | Shortest path | |
| Tool change time | 15 sec. | |
| MOTORS | ||
| Spindle motor | 22 / 26 kW | |
| Servo motor for X, Y, Z, B, W | 7 / 6 / 7 / 7 / 7 kW | |
| Hydraulic pump | 3.7kW | |
| Spindle oil cooler pump | 1.95kW | |
| Coolant pump | 1kW | |
| GENERAL INFORMATION | ||
| Pneumatic required | 6 kg/cm2 | |
| Coolant tank | 250L | |
| Machine dimension | 4285x5587x3605mm | |
| Machine weight (Approx.) | 22000kg | |
| CNC control | Fanuc 0i-MF | |
Standard Accessories
- Heidenhain absolute angle encoder on B axis
- Spindle oil chiller
- Centralized auto lubrication system
- Coolant system
- Chip air blow
- Heat exchanger for cabinet
- Work lamp
- M30 automatic power off
- Portable MPG handwheel
- Alarm lamp
- Tool box with adjustment tools
- Leveling blocks and bolts
Optional Accessories
- Coolant thru spindle with pressure 20 bar
- Chip conveyor with bucket
- Spindle support
- Table splash guard
- Transformer for other than 220V
- Right angle milling head
- Angle plate
- Oil skimmer