| TABLE |
| Table size |
1,500 x 1,200 mm (59 x 47-1/4 inch) |
| T slot (Wide x No. x Pitch) |
22H8 x 7 x 150 mm (0.86 x 7 x 6 inch) |
| Max load capacity |
5,000 kg (11,000 lbs) |
| Min. indexing unit |
0.001° (Every 90 deg with locating pin) |
| B axis rapid feed |
2 rpm |
| CAPACITY |
| X axis travel |
2,000 mm (78-3/4 inch) |
| Y axis travel |
1,500 mm (59 inch) |
| Z axis travel |
1,400 mm (55-3/32 inch) |
| W axis travel |
550 mm (21-5/8 inch) |
| Spindle nose to table center |
-30 ~ 1,920 mm ( - 1-3/16 ~ 75.1/2 inch) |
| Spindle center to table top |
0 ~ 1,500 mm (0 ~ 59 inch) |
| SPINDLE |
| Spindle nose |
BT50 |
| Spindle diameter |
110 mm |
| Output max. |
135 kg-m |
| Spindle speed (2 ranges) |
Lo-speed |
5 ~ 625 rpm |
| Hi-speed |
626 ~ 2,500 rpm |
| FEED |
| Rapid X/ Y/ Z/W axis |
10 / 10 /10 / 6 m/min |
| Feed rate of X/ Y/ Z axis |
1 ~ 6,000 mm/min |
| Feed rate of W axis |
1 ~ 4,000 mm/min |
| X/ Y/ Z axis ballscrew (Dia. / Pitch) |
63 / 10 mm |
| W axis ballscrew (Dia. / Pitch) |
40/10 mm |
| A.T.C. |
| Magazine capacity |
60 pcs |
| Pull stud |
MAS-P50T-1 |
| Max. tool length |
400 mm |
| Max. tool weight |
25 kg |
| Max. tool diameter |
ψ125 / ψ250 mm (w/o adjacent tool) |
| Tool selection |
Sequence by shortest path |
| Tool change time |
15 sec. |
| MOTORS |
| Spindle motor |
22 / 26 kW |
| Servo motor for X/ Y/ Z/ B/ W |
6 / 6 / 6 / 7 / 7 kW |
| Hydraulic pump |
3.7kW |
| Spindle oil cooler pump |
1.18kW |
| GENERAL INFORMATION |
| Pneumatic required |
6 kg/cm2 |
| Coolant tank |
250L |
| Machine dimension |
4,480 x 5,510 x 3,820 mm |
| Machine weight (Approx.) |
24,500 kg (53,900 lbs) |
| CNC controller |
Fanuc 0i-M |
